Hissə adı | material | ||
Valf gövdəsi | grey cast iron | ||
Bonnet | grey cast iron | ||
Disk | grey cast iron | ||
Sızdırmazlıq halqası | rubber |
Application: Widely used in the bottom end of the pipeline, it can automatically prevent liquid from flowing backward
model | Nominal təzyiq (mpa) |
Test təzyiqi (mpa) | müvafiq temperatur | Tətbiq olunan mühit | |||
güc | möhür | ||||||
H42X-2.5 | 0.25 | 0.40 | 0.28 | ≤50 ℃ | su |
model | Nominal diametr (mm) |
Ölçü (mm) | |||||
H | D | D1 | D2 | bf | z-φd | ||
H42X-2.5 | 50 | 120 | 140 | 110 | 90 | 12-2 | 4 * φ14 |
65 | 135 | 160 | 130 | 110 | 12-2 | 4 * φ14 | |
80 | 165 | 185 | 150 | 125 | 14-2 | 4 * φ18 | |
100 | 175 | 205 | 170 | 145 | 14-2 | 4 * φ18 | |
125 | 210 | 235 | 200 | 175 | 14-2 | 8 * φ18 | |
150 | 250 | 260 | 225 | 200 | 16-3 | 8 * φ18 | |
200 | 280 | 315 | 280 | 255 | 18-3 | 8 * φ18 | |
250 | 390 | 370 | 335 | 310 | 18-3 | 12 * φ18 | |
300 | 410 | 435 | 395 | 362 | 19-3 | 12 * φ23 | |
350 | 520 | 485 | 445 | 412 | 25-3 | 12 * φ23 |
1.Biz Qum və ya Precision tökmə texnologiyasına sahibik, buna görə də sizin rəsm dizaynınız və istehsalınız kimi edə bilərik.
2. Müştərilərin loqotipləri klapan gövdəsinə tökülür.
3. Emaldan əvvəl temperləmə proseduru ilə bütün tökmələrimiz.
4. Use the CNC lathe during whole process.
5. The disc sealing surface use plasma welding machine welding
6. Every valve must be tested before delivery from the factory, only qualified onescanbe shipped.
7. Paketləmək üçün adətən taxta qutulardan istifadə etdiyimiz növ klapan, biz də uyğun olaraq edə bilərik
xüsusi müştəri tələbləri.