Mai . 27, 2025 11:16 Back to list

High-Performance 1/2" Butterfly Valves 50/65/80mm Sizes

Introduction to Butterfly Valve Sizing & Technical Advantages
Critical Data: Flow Rates & Pressure Handling
Performance Comparison of 50mm, 65mm, and 80mm Models
Customization for Industrial Specifications
Case Study: Petrochemical Plant Retrofit
Maintenance Best Practices
Why Butterfly Valve 1 2 Dominates Modern Systems

(butterfly valve 1 2)

Precision Engineering in Butterfly Valve 1 2 Systems

Butterfly valves measuring 50mm, 65mm, and 80mm demonstrate 18-22% higher flow efficiency than standard gate valves in recent ASTM F1370 tests. The 1/2" compact variant particularly excels in space-constrained applications, achieving 94% leak prevention through triple-offset designs.

Flow Dynamics & Operational Thresholds

Third-party verification shows our 80mm model handles 2,800 L/min at 25 bar, outperforming competitors by 31% in surge resistance. The table below compares critical metrics across sizes:

Size	Max Pressure (PSI)	Cv Factor	Actuation Time
50mm	232	210	3.2s
65mm	215	340	4.1s
80mm	198	490	5.4s

Manufacturer Benchmark Analysis

Independent testing compared three major suppliers under ISO 5208 standards:

Brand	Cycle Life	Corrosion Resistance	Warranty
Supplier A	25k cycles	316 SS	5 years
Supplier B	40k cycles	Alloy C276	7 years
Supplier C	60k cycles	Duplex Steel	10 years

Application-Specific Configuration Options

Our 65mm valve was modified for a North Sea offshore platform with:

Enhanced stem reinforcement (+42% torsion strength)
Subsea epoxy coating (tested to 500m depth)
Emergency fail-safe mechanism (0.8s closure)

Refinery Pressure Regulation Success

A Middle Eastern facility achieved 99.97% uptime after installing 78 units of 80mm valves in crude preheating circuits. Maintenance intervals extended from 6 to 18 months post-installation.

Operational Longevity Protocols

Quarterly lubrication of 50mm valves reduced seal degradation by 63% in abrasive media applications. Annual torque verification prevents actuator overload - critical for 65mm valves handling viscous fluids.

Butterfly Valve 1 2: The Industrial Standard

With 83% adoption rate in new LNG terminals, the 1/2" - 80mm series now dominates process industries. Field data confirms 19% energy savings versus traditional designs, driving ROI within 14 months.

(butterfly valve 1 2)

FAQS on butterfly valve 1 2

Q: What is the difference between a butterfly valve 1 2 and an 80mm butterfly valve?

A: A butterfly valve 1 2 refers to a 1.5-inch (approximately 38mm) valve, while an 80mm butterfly valve is larger. The sizing difference determines flow capacity and application suitability.

Q: Can a 50mm butterfly valve be used for high-pressure systems?

A: A 50mm butterfly valve is suitable for moderate-pressure applications. Always check the valve's pressure rating and material specifications before installation.

Q: How to install a butterfly valve 65mm in a piping system?

A: Align the 65mm butterfly valve between flanges, insert bolts, and tighten evenly. Ensure the disc remains open during installation to avoid damage.

Q: What applications are ideal for a butterfly valve 80mm?

A: An 80mm butterfly valve works well in water treatment, HVAC systems, and industrial pipelines. Its size balances flow control and space efficiency.

Q: Are butterfly valve 1 2 and 50mm valves interchangeable?

A: No. A butterfly valve 1 2 (1.5-inch/38mm) and a 50mm valve have different port sizes. Use adapters or select the correct size for your system.

12-Inch Gate Valve Price Durable & Corrosion-Resistant Valves